Hadco Lighting I3.5 Inground Incandescent Light, Natural Bronze - Seginus Lighting

Hadco Lighting I3.5 Inground Incandescent Light, Natural Bronze

Seginus Lighting

Mfg ID #: I3.5-N

  • $605.20

Expert Support & Project Quotes

The revolutionary i3.5 composite inground provides optimum performance in a small aperture luminaire. Patented design elements including a hinged lens ring, potted factory seal, cool lens option and only 2 screws that do not require a torque wrench - the i3.5 reinforces HADCO's position as the leader in landscape lighting. Now available with LED

Features

  • Ensures long-lasting durability
  • Creates a variety of effects
  • High-impact resistance
  • Dust-tight, dual-rated, sealed against direct jets of water and continuous immersion
  • Single-piece composite housing includes separate sealed compartments
  • Tempered borosilicate lens
  • IP66/68 rated

Specifications

  • Housing:Potted factory seal with anti-wicking wiring between grade-level junction compartment and ballast compartment. Isolated ballast compartment with slotted, silicone-gasket cover. Single-piece compression molded fiberglass reinforced polyester composite, factory pressure tested to ensure water will not wick or leak through. Separate sealed compartments provide isolation between field wiring, optics, and ballast. Isolated, grade-mounted sealed wiring compartment with two (2) 3/4" threaded conduit inlets in bottom for feed-through wiring capabilities and supplied with gel-filled wire nuts. Cast cover to match trim ring with two captive stainless steel slotted Phillips machine screws for access. Trim ring is natural cast bronze. Rock guard used for directional glare control made of natural cast bronze. Ring is factory pre-drilled for optional guard. Lens ring is hinged with two captive stainless slotted Phillips machine screws for access to lamping compartment (tamper-resistant screws available upon request.)
  • Lamping: Lamp is not included. 150W maximum PAR38/R40 incandescent lamp.
  • Optical Assembly: Clear, slightly convexed, molded borosilicate glass, high impact, 3000 lb. live load rated, drive-over glass, with molded wrap around 100% silicone lens gasket. Aiming 15a° either side of vertical and full 360a° rotation. Angle degree marks for precise vertical aiming with tool-less aiming. Handle enables easy tool-less removal of optical assembly for hot aiming and re-lamping, simply press-fit back into place.
  • Electrical Assembly: Slotted ballast assembly with Quick Disconnects mounted to cast aluminum bracket for easy maintenance.
  • Certifications: Manufactured to ISO 9001:2008 Standards. ADA compliant when used in concrete and flush mounted with CPS25. ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
  • Warranty: Ten-year limited warranty.
  • Height: 15.75 Inch
  • Width: 7.5 Inch
Product Files

Click for product spec sheet

...Read More


The revolutionary i3.5 composite inground provides optimum performance in a small aperture luminaire. Patented design elements including a hinged lens ring, potted factory seal, cool lens option and only 2 screws that do not require a torque wrench - the i3.5 reinforces HADCO's position as the leader in landscape lighting. Now available with LED

Features

  • Ensures long-lasting durability
  • Creates a variety of effects
  • High-impact resistance
  • Dust-tight, dual-rated, sealed against direct jets of water and continuous immersion
  • Single-piece composite housing includes separate sealed compartments
  • Tempered borosilicate lens
  • IP66/68 rated

Specifications

  • Housing:Potted factory seal with anti-wicking wiring between grade-level junction compartment and ballast compartment. Isolated ballast compartment with slotted, silicone-gasket cover. Single-piece compression molded fiberglass reinforced polyester composite, factory pressure tested to ensure water will not wick or leak through. Separate sealed compartments provide isolation between field wiring, optics, and ballast. Isolated, grade-mounted sealed wiring compartment with two (2) 3/4" threaded conduit inlets in bottom for feed-through wiring capabilities and supplied with gel-filled wire nuts. Cast cover to match trim ring with two captive stainless steel slotted Phillips machine screws for access. Trim ring is natural cast bronze. Rock guard used for directional glare control made of natural cast bronze. Ring is factory pre-drilled for optional guard. Lens ring is hinged with two captive stainless slotted Phillips machine screws for access to lamping compartment (tamper-resistant screws available upon request.)
  • Lamping: Lamp is not included. 150W maximum PAR38/R40 incandescent lamp.
  • Optical Assembly: Clear, slightly convexed, molded borosilicate glass, high impact, 3000 lb. live load rated, drive-over glass, with molded wrap around 100% silicone lens gasket. Aiming 15a° either side of vertical and full 360a° rotation. Angle degree marks for precise vertical aiming with tool-less aiming. Handle enables easy tool-less removal of optical assembly for hot aiming and re-lamping, simply press-fit back into place.
  • Electrical Assembly: Slotted ballast assembly with Quick Disconnects mounted to cast aluminum bracket for easy maintenance.
  • Certifications: Manufactured to ISO 9001:2008 Standards. ADA compliant when used in concrete and flush mounted with CPS25. ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
  • Warranty: Ten-year limited warranty.
  • Height: 15.75 Inch
  • Width: 7.5 Inch

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

We Also Recommend

Hadco CUL7 Replacement Top & Glass Assembly (Only) 31004174T - Seginus Lighting

Hadco CUL7 Replacement Glass Tube & Top Assembly (Only) 31004174T

Regular price $79.93
Hadco CUL7 12V Medium Copper Path Light - Seginus Lighting

Hadco CUL7 12V Medium Copper Path Light

Regular price $119.77
CM.JQLED.G4.3000K.3.5W 12V LED G4 Light Bulb

CM.JQLED.G4.3000K.3.5W 12V LED G4 Light Bulb

Regular price $18.97
CopperMoon Lighting CM.675 Up-Down Raw Brass Outdoor Wall Light For MR16

CopperMoon CM.675 12V Up-Down Raw Brass Outdoor Wall Light For MR16

Regular price $199.50
Hadco DB30 LED Bollard - Seginus Lighting

Hadco DB30 LED and Incandescent Bollard

Sale price $275.40 Regular price $306.00 Save $30