Hadco UWUL516 Composite 50W MR16 Underwater Light in Bronze Finish

Hadco UWUL516 Composite 50W MR16 Underwater Light in Bronze Finish

Hadco Lighting

Mfg ID #: UWUL516-H

  • $142.16

Normally ships within 2-10 business days

Expert Support & Project Quotes

  • To view the fixture dimensions and details, click on the PDF link under "Product Files" below.
  • Lamp Included

    Built to last with injection molded fiberglass reinforced Ultem High Performace Polymer, the UWUL516 composite underwater fixture delivers the signature engineering and durable construction of Hadco.

    Features

    • Superior durability
    • Ultimate protection
    • Optimizes any lighting effect
    • Up to 25,000 hour life
    • One-piece, injection molded construction
    • Dimmable
    • Warm or cool LEDs available
    • Silicone gasketing

    Specifications

    • Housing: One-piece injection molded ULTEMa® High Performance Polymer composite. Fasteners are 300 series stainless steel. Lens ring is a Single-piece injection molded ULTEMa® High Performance Polymer with gasketed lens. Twist-off operation for ease of maintenance
    • Optical Assembly: Clear tempered glass lens.
    • Lamping for LED: 7W lamp with 25a° or 35a° beam spread, 25,000 hours life. Color temperature (CCT): Warm White (3,000K nominal). No Mercury. Dimmable. Approximately 460 lumens.
    • Lamping for Non LED: 50W maximum MR16 bi-pin lamp. Lower wattage lamps are acceptable. Lamp is not included.
    • Electrical Assembly: Standard 10 ft. 18-2, 105a° C, STWA water-resistant cord. Fixture is prewired and potted to prevent water entry. Bi-pin socket type (GU5.3) with 250a° C high temperature Teflon coated wire leads. 12 Volt system requires remote transformer, not included
    • Mounting:Weighted concrete with swivel to allow up to 90a° aiming.
    • Warranty for LED: Five-year limited warranty
    • Warranty for Non LED: Three-year limited warranty.
    • Certifications: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.
    • Height: 6.68 Inch
    • Width: 5.12 Inch
    • Max. Weight: 5.04 lb.
    Product Files

    Click for LED spec sheet

    Click for Non LED spec sheet

    ...Read More


    Lamp Included

    Built to last with injection molded fiberglass reinforced Ultem High Performace Polymer, the UWUL516 composite underwater fixture delivers the signature engineering and durable construction of Hadco.

    Features

    • Superior durability
    • Ultimate protection
    • Optimizes any lighting effect
    • Up to 25,000 hour life
    • One-piece, injection molded construction
    • Dimmable
    • Warm or cool LEDs available
    • Silicone gasketing

    Specifications

    • Housing: One-piece injection molded ULTEMa® High Performance Polymer composite. Fasteners are 300 series stainless steel. Lens ring is a Single-piece injection molded ULTEMa® High Performance Polymer with gasketed lens. Twist-off operation for ease of maintenance
    • Optical Assembly: Clear tempered glass lens.
    • Lamping for LED: 7W lamp with 25a° or 35a° beam spread, 25,000 hours life. Color temperature (CCT): Warm White (3,000K nominal). No Mercury. Dimmable. Approximately 460 lumens.
    • Lamping for Non LED: 50W maximum MR16 bi-pin lamp. Lower wattage lamps are acceptable. Lamp is not included.
    • Electrical Assembly: Standard 10 ft. 18-2, 105a° C, STWA water-resistant cord. Fixture is prewired and potted to prevent water entry. Bi-pin socket type (GU5.3) with 250a° C high temperature Teflon coated wire leads. 12 Volt system requires remote transformer, not included
    • Mounting:Weighted concrete with swivel to allow up to 90a° aiming.
    • Warranty for LED: Five-year limited warranty
    • Warranty for Non LED: Three-year limited warranty.
    • Certifications: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.
    • Height: 6.68 Inch
    • Width: 5.12 Inch
    • Max. Weight: 5.04 lb.
    Signify North America Corporation (“Signify”) warrants to the original
    purchaser (“Purchaser”) that the Signify branded outdoor professional
    luminaires identified on Schedule 1 (“Products”) will be free from
    defects in material and workmanship which cause the Product to fail
    to operate in accordance with the performance specifications set
    forth in documentation published for or provided with the Product
    (“Specifications”) for the applicable period and subject to the additional
    terms and conditions set forth on Schedule 1 from the date of purchase
    (as set forth in the applicable invoice) (“Warranty Period”).
    Product Line
    Product LineLEDNon-LEDSpecial Conditions
    Hadco Landscape and
    Residentia
    5 Years3 YearsLandscape Products: Warranty Period for all grade mounted composite luminaires, copper
    luminaires and transformers is 10 years. Lifetime warranty offered on the finish for all cast
    bronze and stainless steel housing.
    Residential Products: Lifetime warranty offered on the finish to all original Purchasers on
    residential lighting fixtures and posts.

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

    We Also Recommend

    Hadco CUL7 Replacement Top & Glass Assembly (Only) 31004174T - Seginus Lighting

    Hadco CUL7 Replacement Glass Tube & Top Assembly (Only) 31004174T

    Regular price $79.98
    Hadco CUL7 12V Medium Copper Path Light

    Hadco CUL7 12V Medium Copper Path Light

    Sale price $115.20 Regular price $144.00 Save $28
    Hadco MUL4 12V Small Mushroom Path Light

    Hadco MUL4 12V Small Mushroom Path Light

    Regular price $121.90
    Hadco DB30 LED and Incandescent Bollard

    Hadco DB30 LED and Incandescent Bollard

    Regular price $318.01
    CM.JQLED.G4.3000K.3.5W 12V LED G4 Light Bulb

    CM.JQLED.G4.3000K.3.5W 12V LED G4 Light Bulb

    Regular price $18.97