Fast & Easy Quote Request
Select the product options and the quantity and then click the “Request A Quote” button. If you do not see the option you want, note that on the request form. You may include your lighting fixtures list and attach files.
- Product Files
- Lumiere Transformers
- Lumiere Warranty
Lanterra 9002-W1 (Up or Down) and 9002-W2 (Up and Down) are small 2.5" O.D., line voltage cylinder fixtures with dimmable LED. The luminiare comes in various mountings, surface mount with integral driver in the housing, remote driver mount with round and square wall plates and square wall integral driver, all of which can be mounted over standard 4 inch j-box. The luminaire also comes with various beam optics. It also comes with various lens, louvers and colors or dichroic filters can be combined up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 ratingFeatures of Lumiere Lanterra 9002 LED, Wall Mounted Cylinder
- Uplight, Downlight or combination of up and downlight
- Up to 1100 delivered lumens and 110 Lm/W
- Spot, Medium, Flood and Wide optics, Field interchangeable
- Premium machined aluminum, brass, bronze, copper or stainless steel
- Line voltage. ELV, Triac and 0-10V std. dimming
- Holds up to 2 accessories (lens, louver, filters)
- Integral and remote driver mounting options. Stainless steel hardware
- Stand-alone integral sensor option
Click for Lumiere Lanterra 9002 Spec Sheet
Click for Lumiere Lanterra MB Installation Instructions (Ground Mount Recessed Box) Installation Instructions
Click for Lumiere Lanterra RSM Installation Instructions (Round Surface Mount) Installation Instructions
Click for Lumiere Lanterra WIS Installation Instructions
Click for Lumiere Lanterra WRx Installation Instructions (Remote driver housing - Round Wall or Round Square) Installation Instructions
Cooper Lighting Outdoor LED Products.
Addendum to Standard Terms and Conditions of Sale.
Subject to all of the limitations set forth in Cooper Lighting’s Terms and Conditions of Sale, for Cooper Lighting Outdoor Light Emitting Diode (LED) luminaires only, Cooper Lighting warrants to the original purchaser that the factory-installed electrical system will be free from defects in material and workmanship for 5 years from the date of shipment of the products. If 10% of the individual LEDs (light sources) should fail within 5 years of shipment, Cooper will, at its sole option, ship a repaired or replacement fixture EXW (Incoterms 2000) Cooper’s factory. The warranty does not cover failures due to abnormal site conditions. These abnormal conditions include, but are not limited to, under/over voltage, under/over current, excessive switching and excessive ambient temperatures.
Subject to all of the limitations set forth in Cooper Lighting’s Terms and Conditions of Sale, for Cooper Lighting Outdoor Light Emitting Diode (LED) luminaires only, Cooper Lighting warrants to the original purchaser finish for a period of 5 years from date of shipment. Cooper will, at its sole option, repair or replace the defective finish if it exhibits cracking, peeling, excessive fading or corrosion defects during the warranty period. During the warranty period some fading, staining or chalking may occur. This is normal aging for the finish used, is not a manufacturing defect, and is not covered by our warranty.