Artemide T087508 Reeds 9.5W LED Single IP68 Outdoor Floor Light
Mfg ID #: T087508
Built to order, ships within 8 weeks
Specifications:
- Power Consumption: 9.5W
- Led Type: 7X1.2W Array
- CCT (Correlated Color Temperature): 3000K
- CRI (Color Rendering Index): >80
- Life Expectancy: 50000Hrs
- Control Type: On/Off
- Driver: Remote power supply (sold separately)
- BUG Rating: B0-U3-G0
Features
- Water sealing is assured by a gasket
- Fixture can be fastened to floor by means of holes in the lower plate
- Supplied with a 4'11"-long H05RN-F 2x1 cable
- Remote driver sold separately
- Remote Driver 12W Dimmable 0-10V (AO0100001)
- Remote Driver 14W Dimmable 2-Wire (AO0100002)
- Technopolymer aesthetic cover
- Base made up of a polycarbonate casing installed between 2 AISI316 stainless steel
- plates by AISI316 stainless steel screws
- Gasket made in silicone
Product Files
Click for Artemide T087508 Spec Sheet 
Click for Gople Portable Brochure
Click for O Elemental Brochure
Click for Tolomeo Mega Outdoor Brochure
Click for Tolomeo Micro Bicolor Brochure
- Description
- Product Files
- Artemide Warranty
- Artemide Returns
Specifications:
- Power Consumption: 9.5W
- Led Type: 7X1.2W Array
- CCT (Correlated Color Temperature): 3000K
- CRI (Color Rendering Index): >80
- Life Expectancy: 50000Hrs
- Control Type: On/Off
- Driver: Remote power supply (sold separately)
- BUG Rating: B0-U3-G0
Features
- Water sealing is assured by a gasket
- Fixture can be fastened to floor by means of holes in the lower plate
- Supplied with a 4'11"-long H05RN-F 2x1 cable
- Remote driver sold separately
- Remote Driver 12W Dimmable 0-10V (AO0100001)
- Remote Driver 14W Dimmable 2-Wire (AO0100002)
- Technopolymer aesthetic cover
- Base made up of a polycarbonate casing installed between 2 AISI316 stainless steel
- plates by AISI316 stainless steel screws
- Gasket made in silicone
Artemide Limited Warranty:
Artemide warrants its products to be free from defects in materials and workmanship. Artemide will repair, or replace, at its discretion, free of charge, products that are proven to be defective. This warranty does not apply to
damages resulting from accident, alteration, tampering, misuse, negligence or abuse. This warranty does not apply to light bulbs and ballasts which are not products manufactured by Artemide and supplied by Artemide only as a service
to the customer. Outdoor and/or damp location luminaires are not warranted for sauna, steam room, etc. usage.
Ballasts are covered by separate ballast manufacturer’s warranties. Artemide hereby expressly reserves the right to limit or exclude consequential damages under the terms of this warranty (some states do not allow the exclusion
of consequential damages so this might not apply to you). Please refer to www.artemide.net/warranty for all details regarding the Artemide new warranty conditions.
In addition to the return terms posted on our returns and cancellation page:
Artemide: Minimum of 30% restocking fee. All claims must be made within 48 hours.
