Description
Pemco Lighting 8' - 14' Aluminum 3" Pole with 3 Bolt Triangular Base
Specifications & Features
- 8' to 14' mounting heights
- Triangular 3-bolt base with spun aluminum collar
- Luminaires are slipfitted on pole top
Structural Base
- All aluminum alloys comply with metallurgical and mechanical properties set forth in the Aluminum Association Standards.
Shaft
- The shaft is extruded new seamless 6061 alloy aluminum and heat treated to produce a T6 temper. The shaft may be drilled for mounting luminaires. All shafts are polished with fine grit aluminum oxide cloths, resulting in a high quality, circumferential satin brushed finish. After finishing each standard is wrapped for protection in shipment.
Anchor Base
- The anchor base is cast from A356 alloy aluminum and heat treated to a T6 temper. The shaft is inserted into the anchor base. The anchor base casting and shaft are joined by a continuous circumferential weld at the outside tip and inside bottom of the anchor base.
Wire Access
- A 1½" diameter wire access hole is incorporated in the anchor base casting and completely concealed by the spun aluminum collar. NEC compliant handhole is provided, flush covered, and centered 18" above the bottom of the standard.
Anchor Bolts
- Each anchor base includes three ½" x 12" steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer sized to match the anchor bolts. A grounding lug is installed opposite the handhole. The pole shaft is fabricated from hot rolled welded steel tubing of one-piece construction with a minimum yield strength of 42 KSI.
Finish
- Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
- Premium finishes (adder): Verde patina, pewter patina, semi-gloss or matte black, satin brushed
- Custom and Marine-grade finishes are available. All RAL colors are available to match (adder)
Additional Information
| Made in the USA/BABA | |
|---|---|
| Manufacture |
Product Files
