Name: SPJ Lighting SPJ-60L12 60W Transformer
Brand: SPJ Lighting
SKU: SPJ-60L12
Price: 205.60 USD
Availability: InStock

Description

SPJ Lighting SPJ-60L12 60W Transformer

Input leads are 20 AWG. Output leads are 14 AWG. Lead insulation is 105. The transformer uses a class B 130 insulation system. Enclosure temperature will not exceed 70 @ 40 ambient. Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors. The removable cover for the wiring compartment is secured in place by a screw. The enclosure is black powder coated.

Features

Manual reset thermal circuit breaker on the secondary side
Controlled with a low-voltage dimmer.
ETL listed
CSA listed
UL standard 5085-1
NEMA 3R enclosure
Shown : Black
Maximum Load : 60 W
Input Voltage : 120 V 60 Hz
Output Voltage Full Load : 11.5 V
Input Current Full Load : 540 mA
Open Circuit Volts : 12.5 V
Output Current Full Load : 4.8 A
Efficiency: 89.20%
Coil Former : Double Section Bobbin
Thermal Class: B 130°
Leads Primary: PVC 600 V #20
Leads Secondary: PVC 300 V #14

Product Files

Click for Product Spec Sheet

SPJ Finishes & Glass

Click here for SPJ finish choices

Click here for SPJ glass choices

Click here for Copper patina aging chart

SPJ Warranty

SPJ Warranty Terms:

SPJ Lighting Inc. warrants its products against defect in material and workmanship. Without charge, SPJ Lighting Inc. will either repair or replace. SPJ Lighting Inc. reserves the right to decide between repair or replacement. Any properly installed SPJ Lighting Inc. product which fails under normal operating conditions within three years from the date of installation, provided it is returned to the factory, transportation prepaid, and our inspection determined it to be defective under the terms of this warranty.

The warranty covers only equipment exclusively manufactured for SPJ Lighting, Inc. and does not extend to transportation, installation or replacement charges; nor does it apply to any equipment of another manufacturer used in conjunction with equipment.

SPJ Lighting Inc. offers a LIMITED LIFETIME WARRANTY on all chemically applied finishes. These finishes will vary over time but will be warranted NOT to peel, flake or corrode. All underwater lights & cast aluminum (powder coat) fixtures are warranted for (1) one year.

SPJ Lighting fixtures are manufactured to meet United States and Canadian Underwriters Laboratories standards.

MTP NightPower & Duty transformers limited 10 year warranty. Lifetime on the stainless steel enclosure.

Transportation charges must be prepaid by the purchaser.

SPJ Cancelation Terms

(a) Cancellation requests must be received in writing.

(b) Cancellation will only be accepted upon payment of charges based upon expenses already incurred.

SPJ Alternations

Any deviation from our standard fixture styles will be subject to handling charge and are NOT returnable for credit.

SPJ Ship Times

SPJ Lighting is experiencing mild delays in production. Ship times maybe slighty extended.

Note: PVD finishes have a 6-8 week production time

SPJ Q&A

How does the SPJ raw copper look and will it patina over time?
Answer: It starts like a brand new penny then it will Patina.
Will the SPJ aged brass patina?
Answer: Yes, all of our chemical finishes patina.
What is the warranty for Powder coating?
Answer: Powder coating only has a 1 year warranty. Powder coating is not recommended for beach environments. Powder coating is an optional feature and not available on all fixtures. Please contact customer service to request a quote.
What is the warrtanty for stainless steel fixtures?
Answer: The warranty is 10 year with proper maintenance. These need to be wiped down at least twice a year with WD40 and a soft cloth.
What replaces the FB-2WREC-TA-2-B-2700K LED engine?
Answer: The FB-LS2 is the replacement. See product page here: FB-LS2
What is PVD finish?
Answer: PVD is a manufacturing process that creates a very durable finish that looks like highly polished Chrome or Satin Nickel. It produces a metal vapor which is deposited on electrically conductive materials. The result is a thin, highly adhered, pure metal or alloy coating. The process is carried out in a vacuum chamber, at high vacuum, using a cathodic arc source. PVD finish is commonly used for bathroom fixtures, exterior door knobs and other hardware that needs to be highly weather resistant, which is why it works perfectly for landscape lighting. Salt resistant, scratch resistant, and-water resistant keeps the PVD finish looking new for many years and is guaranteed not to patina in any outdoor environment. To maintain the finish, proper care is needed. These need to be wiped down at least twice a year with WD40 and a soft cloth.
Are all landscape fixtures powdercoated?
Answer: No, the finishes are chemically etched (except for PVD finishes) unless specially requested in powdercoating. Not all fixtures are available with a powdercoating option either. To maintain the finish, proper care is needed. These need to be wiped down at least twice a year with WD40 and a soft cloth.
Are SPJ Lighting's landscape 12V fixtures AC or DC?
Answer: The lights are AC/DC which means they will work with either an AC driver or DC driver
Can the LED engines be dimmed?
Answer: The engines can be dimmed with a magnetic transformer and a magnetic low voltage dimmer

SPJ PVD Finishes

SPJ Lighting, Inc. is offering new state of the art PVD finishes (physical vapor deposition) which is a manufacturing process that creates a very durable finish that looks like highly polished Chrome or Satin Nickel. Physical Vapor Deposition (PVD) is a process that produces a metal vapor which is deposited on electrically conductive materials. The result is a thin, highly adhered, pure metal or alloy coating. The process is carried out in a vacuum chamber, at high vacuum, using a cathodic arc source. PVD finish is commonly used for bathroom fixtures, exterior door knobs and other hardware that needs to be highly weather resistant, which is why it works perfectly for landscape lighting. Salt resistant, scratch resistant, and-water resistant keeps the PVD finish looking new for many years and is guaranteed not to patina in any outdoor environment.

*Production time for PVD is 6 - 8 weeks

SPJ Returns

Made to order items including PVD options and lanterns and electronic parts are non returnable and non cancellable. Landscape and quick ship its are subject to 30% restocking fee with manufacturer approval.

SPJ Lighting SPJ-60L12 60W Transformer

Description

SPJ Lighting SPJ-60L12 60W Transformer

Features

Product Files

SPJ Lighting SPJ-60L12 60W Transformer

You may also like

Recently viewed

Customer Reviews

SPJ Lighting SPJ-60L12 60W Transformer

Features

SPJ Lighting is experiencing mild delays in production. Ship times maybe slighty extended.