Description
- Description
- Product Files
- Techlight Terms
Techlight CBB Composite Burial Enclsoure with Low Voltage Transformer
Construction
Made from a compression molded, fiberglass reinforced polyester composite housing. It is resistant to rust, corrosion, oils, gasoline, and detergents. Provided with a 600W Low Voltage transformer that is fully encapsulated. Comes standard with junction compartment and anti-siphon barrier. Corrosion resistant stainless steel hardware. Dark Bronze finish is standard on the burial box. ETL rated for wet locations.
Electrical System
Housing is prewired with high temperature wire. Silicone filled, waterproof wire nuts and potting compound are provided for installation. 120V input / 12V output. Total wattage varies based on model type.
Mounting
Mount composite burial enclosure in excavated hole with allowance for a minumum of 3" backfill. Two 3/4" NPT and two 1/2" NPT conduit entries are provided. Flexible conduit (not provided) is recommended for connections to aid in fixture placement/adjustment. Housing cover is fully gasketed to provide a water tight seal.
TECHLIGHT USA RETURNED GOOD POLICY
There is a restocking charge on any item returned for credit or exchange. A restocking charge will be made on returned merchandise which does not have a confirmed RGA authorization number. All approved returns will be subject to a handling charge, freight, and cost of reconditioning and repacking if it is deemed necessary to restore the goods to realable form. Techlight reserves the right to adjust the restocking charge or refuse return authorization on the following exclusions. (1) If the product requires repackaging. (2) If the product is damaged. (3) Unsalable without excessive repair. (4) If the product is a custom color. (5) If the product is a custom order. (6) Damage to poles: all poles are shipped in a standard non-soluble, water resistant packing material, or may be completely packaged in cardboard and marked with warning notice for removal. Failure to remove the packaging upon arrival may result in damage to the pole finish, thus disallowing returns and voiding the warranty. It is the responsibility of the customer to inspect poles for freight damage upon deliver. Any claim for damages in transit must be made by the purchaser to the delivering carrier. Techlight will accept no responsibility for the failure to do so.
