Description
- Description
- Product Files
- Techlight Terms
Techlight L2PCN LED Petroleum Canopy
Application
The high performance luminaire is designed for petroleum station canopy applications where long life, low maintenance, and consistent color rendering is required. All areas with limited accessibility due to fixture location or where heavy pedestrian or vehicle traffic makes maintenance dif- ficult are ideal applications such for this fixture.
Construction
The heavy duty LED housing is constructed of cast alu- minum. The mounting box is constructed of .063" thick sheet aluminum with a welded seam. The hinged door frame is constructed of .093" sheet aluminum. An EPDM foam and silcone rubber gasket is used for a watertight seal.
Finish
A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: White. Custom colors available upon request.
Optical System
Light is directed through a clear, flat tempered glass lens providing a uniform and symmetrical light pattern.
Electrical System
Available in 5000K Cool White (+/- 150K) color temperatures propagated with LG Innotek 3030 LEDs. Minimum 80 CRI. Available with 90-300V 50/60 Hz. LEDs rated over 50,000 hours (TM21 Cal- culated L70) at 25°C ambient temperature with available 1250mA operation. Lumen Maintenance >97% at 50K hrs. 347V and 480V input options avail- able. Standard 0-10V dimming. Driver provided with integral 4kV surge pro- tection that meets IEEE C62.42.2-2002. 10kV Surge Suppressor standard. Built-in Active PFC Function. LED Power Supply conforms to UL1310 Class 2 and UL8750 standards and is IP67 rated for wet locations.
Mounting
The fixture can be easily installed by one person. It may be mounted into a 12" or 16" deck pan. Door/LED assembly utilizes quick re- lease hinges to allow the fixture body to be mounted first using 4 Pan Truss screws. Door/LED assembly may then be attached to the body and wiring connections made. A silcone sponge gasket and clamping plate is installed from the top of the canopy to prevent water intrusion. Incoming power con- nections can then be made inside a wet location juntion box (provided by others).
Listings
ETL listed for wet locations (IP64). Meets US and Canadian safety standards. -40°C to 40°C ambient operation. RoHS Compliant.
TECHLIGHT USA RETURNED GOOD POLICY
There is a restocking charge on any item returned for credit or exchange. A restocking charge will be made on returned merchandise which does not have a confirmed RGA authorization number. All approved returns will be subject to a handling charge, freight, and cost of reconditioning and repacking if it is deemed necessary to restore the goods to realable form. Techlight reserves the right to adjust the restocking charge or refuse return authorization on the following exclusions. (1) If the product requires repackaging. (2) If the product is damaged. (3) Unsalable without excessive repair. (4) If the product is a custom color. (5) If the product is a custom order. (6) Damage to poles: all poles are shipped in a standard non-soluble, water resistant packing material, or may be completely packaged in cardboard and marked with warning notice for removal. Failure to remove the packaging upon arrival may result in damage to the pole finish, thus disallowing returns and voiding the warranty. It is the responsibility of the customer to inspect poles for freight damage upon deliver. Any claim for damages in transit must be made by the purchaser to the delivering carrier. Techlight will accept no responsibility for the failure to do so.
