Use this bar to show information about your cookie policy.
The LBOL8S was built to be both decorative and functional. They can be used to light pathways and walkways to help direct pedestrian traffic. They can add value to the aesthetics of a building or structure. The LED light source makes this fixture efficient as well as producing optimal color rendition.
The LED light source is housed within a aluminum LED body with heat dissipating fins. The fixture is made with a durable extruded aluminum housing with overall height of 47". A clear polycarbonate lens protects the optical system.
A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request.
The fixture comes with an aluminum reflector that creates a symmetric light pattern. It reflects the light down and outward reducing light spillage.
A 36 watt LED source provides approximately 1833 (CW) Lumens of light.The LED Driver is mounted to an zinc plated steel ballast tray for easy installation.
The bollard comes standard with a zinc base plate, three (3) 3/4" x 18" x 3" anchor bolts, and a rigid anchor bolt template. A centrally located wire entrance is provided. The housing is mounted to the base plate via flush mounting screws.
TECHLIGHT USA RETURNED GOOD POLICY
There is a restocking charge on any item returned for credit or exchange. A restocking charge will be made on returned merchandise which does not have a confirmed RGA authorization number. All approved returns will be subject to a handling charge, freight, and cost of reconditioning and repacking if it is deemed necessary to restore the goods to realable form. Techlight reserves the right to adjust the restocking charge or refuse return authorization on the following exclusions. (1) If the product requires repackaging. (2) If the product is damaged. (3) Unsalable without excessive repair. (4) If the product is a custom color. (5) If the product is a custom order. (6) Damage to poles: all poles are shipped in a standard non-soluble, water resistant packing material, or may be completely packaged in cardboard and marked with warning notice for removal. Failure to remove the packaging upon arrival may result in damage to the pole finish, thus disallowing returns and voiding the warranty. It is the responsibility of the customer to inspect poles for freight damage upon deliver. Any claim for damages in transit must be made by the purchaser to the delivering carrier. Techlight will accept no responsibility for the failure to do so.
We deliver worldwide
Your shipping service or ours
Project quotes
Competitive project quotations
Top-notch support
Personal expert service
Secure payments
The latest payment technologies
The LBOL8S was built to be both decorative and functional. They can be used to light pathways and walkways to help direct pedestrian traffic. They can add value to the aesthetics of a building or structure. The LED light source makes this fixture efficient as well as producing optimal color rendition.
The LED light source is housed within a aluminum LED body with heat dissipating fins. The fixture is made with a durable extruded aluminum housing with overall height of 47". A clear polycarbonate lens protects the optical system.
A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request.
The fixture comes with an aluminum reflector that creates a symmetric light pattern. It reflects the light down and outward reducing light spillage.
A 36 watt LED source provides approximately 1833 (CW) Lumens of light.The LED Driver is mounted to an zinc plated steel ballast tray for easy installation.
The bollard comes standard with a zinc base plate, three (3) 3/4" x 18" x 3" anchor bolts, and a rigid anchor bolt template. A centrally located wire entrance is provided. The housing is mounted to the base plate via flush mounting screws.
TECHLIGHT USA RETURNED GOOD POLICY
There is a restocking charge on any item returned for credit or exchange. A restocking charge will be made on returned merchandise which does not have a confirmed RGA authorization number. All approved returns will be subject to a handling charge, freight, and cost of reconditioning and repacking if it is deemed necessary to restore the goods to realable form. Techlight reserves the right to adjust the restocking charge or refuse return authorization on the following exclusions. (1) If the product requires repackaging. (2) If the product is damaged. (3) Unsalable without excessive repair. (4) If the product is a custom color. (5) If the product is a custom order. (6) Damage to poles: all poles are shipped in a standard non-soluble, water resistant packing material, or may be completely packaged in cardboard and marked with warning notice for removal. Failure to remove the packaging upon arrival may result in damage to the pole finish, thus disallowing returns and voiding the warranty. It is the responsibility of the customer to inspect poles for freight damage upon deliver. Any claim for damages in transit must be made by the purchaser to the delivering carrier. Techlight will accept no responsibility for the failure to do so.