Description
- Description
- Product Files
- Techlight Terms
Techlight TDB2W Small HID/Incandescent Burial Light
Construction
The housing is made of compression molded fiber reinforced polyester composite. The color impregnated SR2 composite will not flake or peal. Multiple ring/guard assemblies are available for a customizable trim finish.
Optical System
Flood and spot reflectors are available for HID E17 lamps. The fixture can accomodate reflector shaped lamps for specific beam patterns. Convex and walk over lenses are both available.
Electrical System
The fixture can be used with up to 75W Par30 Incandescent, 50W Mercury Vapor, 50W Metal Halide, 50W High Pressure Sodium, or 32W Compact Fluorescent lamp/ballast systems. All ballast trays are thermally protected and come pre-wired to specific line voltages via quick connects. Pre-installed 15 and 30 power cords are available from the factory.
Mounting
The TDB2W Well Light is an in-ground fixture and should be installed with back fill according to the Techlight TDB installation instructions. A 1/2" conduit entry is supplied into the anti-siphon chamber of the housing.
TECHLIGHT USA RETURNED GOOD POLICY
There is a restocking charge on any item returned for credit or exchange. A restocking charge will be made on returned merchandise which does not have a confirmed RGA authorization number. All approved returns will be subject to a handling charge, freight, and cost of reconditioning and repacking if it is deemed necessary to restore the goods to realable form. Techlight reserves the right to adjust the restocking charge or refuse return authorization on the following exclusions. (1) If the product requires repackaging. (2) If the product is damaged. (3) Unsalable without excessive repair. (4) If the product is a custom color. (5) If the product is a custom order. (6) Damage to poles: all poles are shipped in a standard non-soluble, water resistant packing material, or may be completely packaged in cardboard and marked with warning notice for removal. Failure to remove the packaging upon arrival may result in damage to the pole finish, thus disallowing returns and voiding the warranty. It is the responsibility of the customer to inspect poles for freight damage upon deliver. Any claim for damages in transit must be made by the purchaser to the delivering carrier. Techlight will accept no responsibility for the failure to do so.
