Techlight TLLMAL-LED LED Aluminum Path Light 9 Inch Mushroom Top

TECHLIGHTSKU: TLLMAL-LED
No reviews

Price:
Sale price$0.00 USD

Description

Techlight TLLMAL-LED LED Aluminum Path Light 9 Inch Mushroom Top

Construction

The integral die cast zinc heat sink has 12 heat dissipating fins to maintain a cool operating LED for maximum life. The fins are independently supported to allow for unobstructed airflow. A chromate pretreatment is applied prior to the finishing process to ensure lasting durability. It remains unseen housed within the tasteful shroud.

Finish

A Super Durable Polyester powder coat finish is electrostatically applied. Standard colors available: Black, Bronze, White, OD Green, Verde. Custom colors available upon request.

Optical System

A high performance optical assembly in conjunction with the LED light source reflects the light off of the dome reflector back down and outwards for 360° illumination while keeping the LED light source completely shielded from view in all directions to exceed full cut-off requirements. This keeps light pollution to an absolute minimum. The convex lens is configured to ensure water runs off and clear of the lens.

Electrical System

A 5 watt single source LED Board provides approximately 250 Lumens of Cool White light, 150 Lumens of Warm White, or 200 Lumens of Neutral White. We also offer a variety of gels lens filters to help meet your specific lighting needs. Consult the factory for availability. The integral driver is mounted securely within the path light stem. Transformer is required for 12V to 24V AC operation.

Mounting

The large version comes standard with an 18" stem and the small version a 12" stem. The stem features a 1/2" NPT threaded end for stake mounting or mounting to a junction box.

TECHLIGHT USA RETURNED GOOD POLICY

There is a restocking charge on any item returned for credit or exchange. A restocking charge will be made on returned merchandise which does not have a confirmed RGA authorization number. All approved returns will be subject to a handling charge, freight, and cost of reconditioning and repacking if it is deemed necessary to restore the goods to realable form. Techlight reserves the right to adjust the restocking charge or refuse return authorization on the following exclusions. (1) If the product requires repackaging. (2) If the product is damaged. (3) Unsalable without excessive repair. (4) If the product is a custom color. (5) If the product is a custom order. (6) Damage to poles: all poles are shipped in a standard non-soluble, water resistant packing material, or may be completely packaged in cardboard and marked with warning notice for removal. Failure to remove the packaging upon arrival may result in damage to the pole finish, thus disallowing returns and voiding the warranty. It is the responsibility of the customer to inspect poles for freight damage upon deliver. Any claim for damages in transit must be made by the purchaser to the delivering carrier. Techlight will accept no responsibility for the failure to do so.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You may also like

Recently viewed