Techlight TLP PAR36 Well Light

TECHLIGHTSKU: TLP

Price:
Sale price$0.00 USD

Description

Techlight TLP PAR36 Well Light

Application

The TLP36W Low Voltage Well Light was designed as a low profile in-ground incandescent well light. It can stand up to the corrosive forces of water, soil, and time. Safety grills are available for a pleasing finish and safety.

Construction

The fixture made from stamped brass and copper with stainless steel hardware. Single piece black ABS mounting sleeve with angle cut comes standard. Comes with 3 of 18-2 low voltage wire and a low voltage connector.

Optical System

The lamp can be rotated 360° and can be tilted up to 45° from vertical. It can be used with up to 50W PAR36 Incandescent lamps. Spring loaded clips allow for easy lamp replacement.

Electrical System

They are designed to be operated with a standard 12V transformer.

Mounting

The TLP PAR36 Well Light is an in-ground fixture and should be installed with back fill according to the Techlight installation instructions. Provides excellent water drainage when installed on on a gravel bed. Comes with 3 of 18-2 low voltage wire. Gelpak provided for conduit installation.

TECHLIGHT USA RETURNED GOOD POLICY

There is a restocking charge on any item returned for credit or exchange. A restocking charge will be made on returned merchandise which does not have a confirmed RGA authorization number. All approved returns will be subject to a handling charge, freight, and cost of reconditioning and repacking if it is deemed necessary to restore the goods to realable form. Techlight reserves the right to adjust the restocking charge or refuse return authorization on the following exclusions. (1) If the product requires repackaging. (2) If the product is damaged. (3) Unsalable without excessive repair. (4) If the product is a custom color. (5) If the product is a custom order. (6) Damage to poles: all poles are shipped in a standard non-soluble, water resistant packing material, or may be completely packaged in cardboard and marked with warning notice for removal. Failure to remove the packaging upon arrival may result in damage to the pole finish, thus disallowing returns and voiding the warranty. It is the responsibility of the customer to inspect poles for freight damage upon deliver. Any claim for damages in transit must be made by the purchaser to the delivering carrier. Techlight will accept no responsibility for the failure to do so.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You may also like

Recently viewed