Description
- Description
- Product Files
- Techlight Terms
Techlight WL HID/Incandescent Well Light
Construction
The die cast aluminum, brass, or zinc housings suspend from the covering grill by two steel spring clips. The grill is secured to the well sleeve with two self-tapping screws.
Optical System
A high-impact tempered glass lens is sealed to the housing using silicone for a watertight seal. The aluminum, brass, or composite safety grill rotates 360° for glare control.
Electrical System
Each fixture is pre-wired with either 15 or 30 of 16/3 cable and is internally grounded. 70W thru 175W mercury vapor or metal halide light sources are available. Fixtures can be ordered less a ballast and lamp for incandescent operation.
Mounting
Fixtures are designed to be in-ground well lights and should be installed according to the installation instructions made available by Techlight. Proper drainage and substrate must be provided for water to flow freely through the well sleeve.
TECHLIGHT USA RETURNED GOOD POLICY
There is a restocking charge on any item returned for credit or exchange. A restocking charge will be made on returned merchandise which does not have a confirmed RGA authorization number. All approved returns will be subject to a handling charge, freight, and cost of reconditioning and repacking if it is deemed necessary to restore the goods to realable form. Techlight reserves the right to adjust the restocking charge or refuse return authorization on the following exclusions. (1) If the product requires repackaging. (2) If the product is damaged. (3) Unsalable without excessive repair. (4) If the product is a custom color. (5) If the product is a custom order. (6) Damage to poles: all poles are shipped in a standard non-soluble, water resistant packing material, or may be completely packaged in cardboard and marked with warning notice for removal. Failure to remove the packaging upon arrival may result in damage to the pole finish, thus disallowing returns and voiding the warranty. It is the responsibility of the customer to inspect poles for freight damage upon deliver. Any claim for damages in transit must be made by the purchaser to the delivering carrier. Techlight will accept no responsibility for the failure to do so.
